Utter’s MF Series pleated filter cartridges are manufactured to fit exact standards and are used in most demanding industrial applications. This filter is manufactured in a wide range of length options and micron ratings. Its media has a fixed pore construction of high quality fibers while providing combination of surface and depth filtration. Due to use of premium quality filter fabrics, this pleated filter cartridges has superior flowcharacteristics with a very low pressure drop compared to depth media of similar micron ratings. This filters large surface area, increased dirt holding capacity, and innovative design provide a long service life, allowing you to reduce the number of cartridges used. Your advantage is a smaller filter vessel, less footprint and lower capital investments.
Features
- Power Plant & Utilities
- Oil exploitation
- Chemical
- Mine exploitation
| Dimension |
[ OD ]：Ø 64mm,Ø 66mm,Ø 69mm [ ID ]：Ø 28mm
[ Length ]：30 ”，40 ”
|
| Material
of Constructions |
[ Media ]：PP,PET, Glass Fiber
[ End Cap Material ]: PP , ABS
[ Center Core ]: PP, ABS
[ Netting ]: PE
[ Sealing ]：Silicone，EPDM，NBR，Viton
[ End Cap Types ]:DOE,222/Flat End
|
| Performance | Operating Pressure and temperature:
The pleated cartridge construction will withstand differentia
Pressures up to 60 PSI(4Bar) at ambient temperature
The optimum changeout differential pressure is 35psi(2.5Bar) up to 52°C
Service condition:
500KPa(5Bar)by 20°C 300KPa(3Bar)by 65°C
|
| Code | OD | Filter Media | Length | Removal Rating | Configuration |
| MF | 64 = 64mm 66 = 66mm 69 = 69mm |
G = PP S = Glass Fiber Z = PET |
30 = 30” （762mm) 40 = 40″ (1016mm) |
1 = 1μm 2 = 2μm 5 = 5μm 10 = 10μm 20 = 20μm 50 = 50μm |
F = DOE M = 222/flat |